JIMMY

Error Codes

Low battery display The lightning icon will flash
101 Flash read/write error
102 AD read error
103 Bluetooth error
⎡‾‾‾‾⎤ Overload error
|_ _ _ _ _| Underload error
201 Calibration fail to start
202 Calibration error
404 Other error

App Connectivity

My JIMMY doesn't connect to my mobile device

  1. 1. Make sure the JIMMY is on
  2. 2. Make sure the device you want to connect with is updated to the most recent version of it's operating system
  3. 3. Double check that your device's JIMMY app is updated to the latest version as well
  4. 4. Make sure your device is not connected to any other JIMMY scale or perhaps other Bluetooth enabled devices
  5. 5. Turn the Bluetooth function on your device on and off
  6. 6. Don't try connecting your device to JIMMY from too far away
  7. 7. Check functionality, if issues still persist, please contact your local distributor for further assistance

My App stopped working

  1. 1. Check that your device has Bluetooth function enabled
  2. 2. Clear all other backgroud applications on your device
  3. 3. Open JIMMY app again
  4. 4. If issue persists, try rebooting your device and try opening JIMMY app again
  5. 5. If issue still persists, please contact your local distributor for further assistance

Additional Questions

My Jimmy powers on but the detachable display freezes on HIROIA

  • 1. Hold the tare button for a 5-7 seconds until the screen shows "bind"
  • 2. Hold the power button for 7 seconds to force power off Jimmy And then power on
  • 3. Hard reset JIMMY (press power button for 6 seconds until you see the thunder icon flashes)
  • 4. Make sure your JIMMY scale is updated with the latest firmware If above steps can not resolve the issue, please contact your dealer.
  • If you have an additional, properly functioning JIMMY scale, you can follow the extra steps to check the malfunctioning device:
  • 1. Exchange the displays between the malfunctioning scale and the functioning scale (malfunctioning display A & functioning scale B, malfunctioning scale A & functioning display B)
  • 2. Bind the device (After turning on the malfunctioning scale with the new display hold the Tare button for 5-7 seconds)
  • 3. Check functionality, if issues still persist, please contact your local distributor for further assistance

My Jimmy scale does not power on

  • 1. Use the included micro USB cable to charge your Jimmy scale for at least 1 hour
  • 2. Hold the power button for 3 seconds to power on your JIMMY
  • 3. Check functionality, if issues still persist, please contact your local distributor for further assistance

My Jimmy scale does not charge

  • 1. Use the included micro USB cable to charge your Jimmy scale for at least 1 hour
  • 2. We recommend using a certified charging block with an output of 5 volts and 1 amp to use for charging
  • 3. Make sure the cable is properly connected to both the charging block and the scale's charging socket
  • 4. Make sure that there are no foreign objects between the display and the scale
  • 5. Make sure that the charging pins are in contact with the charging ports (5 metal pins)
  • 6. Check functionality, if issues still persist, please contact your local distributor for further assistance

My Jimmy's reading is inaccurate

  • 1. Make sure the scale is on the flat surface.Check the scale surface is skewed or deformed, this might result of a hard impact to the scale plate
  • 2. Enter the settings menu by turning on the scale, holding the timer button
  • 3. Scroll through the menu and select the calibrate mode
  • 4. Select the calibration option that is best for you:
              - 1 point calibration:please prepare 100g weights
              - 3 point calibration:please prepare 500g, 1000g, 2000g weights
  • 5. Go back to the settings menu by long pressing the timer button, and select the Reset option
  • 6. Check functionality after Jimmy has turned on again
  • 7. Check functionality, if issues still persist, please contact your local distributor for further assistance